Editing Cycle 15/Proposal Drafting (section)

== Party Game Nomic Wheel ==

''[https://discord.com/channels/515560801394753537/1192640599048859678 Read the discussion here]''

Add a subrule to the rule '''Spaces''' entitled '''Spinner''' with the text:
<blockquote>
"Spinner" is a type of space. When a player lands on a spinner space, they must roll 1d4. This number is then added to the Wheel Rotation.
</blockquote>

Add a subrule to the rule '''Spaces''' entitled '''Crystal Beam''' with the text:

<blockquote>
"Crystal Beam" is a type of space. When a player lands on a crystal beam space, they must choose one of the following sets of spaces:
* Spaces 200 through 204 and all successors of space 204.
* Spaces 205 through 209 and all predecessors of space 205.
* Spaces 210 through 214 and all predecessors of space 210.
* Spaces 215 through 219 and all successors of space 219.
All players on any space in the selected set lose one crystal.
</blockquote>

Add a subrule to the rule '''Board''' entitled '''Wheel Rotation''' with the text:
<blockquote>
Wheel rotation is an integer that tracks the rotation of the wheel spaces within the board's main loop. If the wheel rotation is less than 0, then 40 is automatically added to the wheel rotation. If the wheel rotation is greater than 39, then 40 is automatically subtracted from it.

For wheel rotation WR, the following connections should exist:
* Space 204 precedes space WR.
* Space 205 succeeds space (WR+10) mod 40.
* Space 210 succeeds space (WR+20) mod 40.
* Space 219 precedes space (WR+30) mod 40.
When the value of wheel rotation changes, remove successors from spaces as specified by the list above, using the previous value of the wheel rotation as WR, then add successors as specified by the list above using the current value of the wheel rotation as WR.
</blockquote>

For each integer N between 200 and 219, inclusive, create space N with the following types:
* If the last digit of N is 1, 4, 5, or 8: Spinner.
* Otherwise, Blank.

Create space 220 with the space type Crystal Beam.

Create the following lines:
* from space 200 to space 204
* from space 205 to space 209
* from space 210 to space 214
* from space 215 to space 219

Also, add successors such that space 220 follows space 209 and space 214 and that space 220 precedes spaces 200 and 215.

Set the Wheel Rotation to 5. Create connections as specified in '''Wheel Rotation''', if they do not already exists.